Custom Cut Stone

Select Stone can provide a variety of custom cut-to-size stone for sills, caps, mantles, hearths, arches and other applications.

Frontier™ Sill, Cap, and Treads

Frontier Sandstone is cut into sill and cap as specified by the customer.

• Frontier wall cap is usually chopped to width and in random lengths.
• Frontier wall cap is usually chopped to width and in random lengths.
• Frontier wall cap is usually chopped to width and in random lengths.
• Frontier column cap are usually chopped to specification.
• Radius wall cap is fabricated on the job site from straight-cut pieces.
• Frontier stair treads can be chopped to random lengths or specified lengths.
• Frontier stair treads can also be sawn to size.
• Sawn-edge Frontier stair treads are typically bush-hammered on the front edge.
• Sawn-edge Frontier stair treads are typically bush-hammered on the front edge.
• Frontier chimney caps
• Frontier goes well as a sill over many different stones. Prairie Fieldstone shown here.
• Frontier tumbled sill over Elkhorn Cobble.
• Frontier sill over Frontier split-face.
• Frontier wall cap
• Frontier curbing is usually thick so it can be set into the ground.

Frontier™ Quoins and Arches

Frontier Sandstone can be cut into custom-size quoins (corner stones) and arches.

• Frontier quoins are large corner stones cut to sizes as specified by the customer.
• Select Stone can cut custom arches and quoins from the Frontier Sandstone.
• Select Stone can cut custom arches and quoins from the Frontier Sandstone.
• Frontier arch stones are cut to fit the dimensions of each opening.

Frontier™ Slabs

Frontier slabs can be cut to size or purchased as raw slabs.

• Frontier slabs can be used for countertops.
• Frontier slabs can be sawn into stair treads.
• Frontier stair treads with bush-hammered front edges.
• Frontier stair treads with bush-hammered front edges.
• Frontier slabs can be used for countertops.
• Frontier slabs can be sawn into wall panels.
• Frontier slabs can be sawn into wall panels.
• Frontier slabs are available raw.
• Frontier slabs can be sawn to size.
• Very large Frontier slabs are available.

Frontier™ Hearths and Mantles

Frontier Sandstone slabs can be cut into beautiful hearths and mantles.

• Frontier hearths and mantles are available in most lengths and thicknesses.
• Frontier hearths and mantles are available in most lengths and thicknesses.
• Frontier mantles can be sawn to size and hand-chiseled by the masonry contractor.
• Frontier lintels can be cut to size and hand-chiseled by the masonry contractor.
• Frontier mantles can be sawn to size and hand-chiseled by the masonry contractor.

Limestone Sills, Caps and Arches

Limestones are typically sawn from large blocks so the top and bottom surfaces of sills and caps are sawn.

• Glen Rose caps are sawn on the top and bottom and hand-pitched on the edges.
• Glen Rose caps are sawn on the top and bottom and hand-pitched on the edges.
• Glen Rose caps are sawn on the top and bottom and hand-pitched on the edges.
• Glen Rose caps are sawn on the top and bottom and hand-pitched on the edges.
• Custom arches and sills can be cut from the Glen Rose or any of the other limestones.
• Custom stair treads can be cut from the Glen Rose or any of the other limestones.